Product name: Integrated conveying dehumidification dryer

Product model: XYMD-450/300A

Product Introduction:

This machine combines three functions of dehumidification, drying, and two-stage feeding in one machine, especially suitable for engineering plastic raw materials with strong moisture absorption (such as PA, PC, PBT, PET), etc. The average dew point can reach -40 ℃, and as low as -55 ℃ or above.

Performance characteristics:

All integrated dehumidification and drying machines are equipped with honeycomb wheels, which can obtain stable low dew point dry air. The design is divided into two types: fully dense and semi open;

Suitable for engineering plastic raw materials with strong moisture absorption, such as PA, PC, PBT, PET, etc. It integrates three functions: dehumidification, drying, and two-stage feeding, and can choose the three-stage feeding function;

This machine is equipped with microcomputer control as standard equipment, and PLC control and LCD touch human-machine interface can be optionally purchased. The operation is centralized and convenient, and the whole machine can be controlled to run automatically;

The insulated drying barrel adopts a bottom blowing duct design and is equipped with a cyclone exhaust device to prevent heat loss, ensure temperature, and improve drying efficiency;

A closed-loop feeding system can prevent the dried raw materials from re wetting due to contact with external air;

The material selection system is equipped with a cut-off valve to ensure that there are no residual raw materials in the material pipe;

This series of dehumidification systems adopts a dual cooler structure to ensure lower return air temperature dew point.

Optional accessories:

The three-stage feeding function that can be used for two molding machines, using PLC control combined with LCD touch human-machine interface;

A dew point detection display that can monitor dew points at any time;

Install a high-efficiency micro dust filter.

Technical parameters: